3M™ Structural Bonding Tape 9214
- 3M Product Number 9214
- 3M ID B40069693
Details
Highlights
- Excellent holding strength, including applications for heavier mirrors and multifunction sensors
- Excellent image stability; helps reduce reflected image distortion from vehicle vibrations
- Pressure sensitive adhesive feature allows for component application to glass without the need for fixturing during cure
- Tape cures to semi-structural strength during most windshield autoclave processes
- For use on glass with and without ceramic paint (frit) applications. Larger applications should be tested for viability
- 3M SBT is pre-applied to hardware components
- Multiple packaging options are available for increased manufacturing efficiency of both automated and manual processes
- Packaging options available for increased manufacturing efficiency of both automated and manual processes
3M™ Structural Bonding Tape 9214 is formulated for bonding hardware components to glass, such as rear view mirror components, sensor brackets and mounting pins.
Formulated for Bonding Components to Glass
3M™ Structural Bonding Tape 9214 is formulated for bonding of rear view mirror buttons, sensor brackets, and mounting pins to automotive windshield glass. This black tape is 98% solid with a thickness of 0.51 mm. It is applied as a pressure-sensitive tape, and then heat-cured to develop structural strength.
Recommended Applications
- Mirror buttons
- Sensor brackets
- Mounting pins
3M Structural Bonding Tape Enables Easier Application
A special advantage of 3M Structural Bonding Tapes, compared to other attachment methods, is the 2-sided pressure sensitive properties in the uncured tape that enables easy handling, positioning and application to clean glass surfaces. The cured state of the tape provides robust structural bonding performance and good resistance to environmental conditions (heat, humidity, hot water, cold, cold shock). 3M SBT provides good bond to clear glass as well as to black ceramic frits. To achieve full wet-out with the adhesive, the surfaces of the windshield and the hardware part need to have a good fit to each other.
Specifications
